Last Updated on Wednesday, 19 October 2016 12:04


Water Aware with Text

The Washington State Department of Health (DOH) implemented the Water Use Efficiency Rule (WUER) in January 2007.  The rule requires water suppliers to develop a Water Conservation Program.  The goal is to decrease water demand by means of water use efficiency measures and to help conserve water for the environment and future generations.  The City of Pullman supports these requirements and believes that the Program will enhance public health by improving water system efficiency and reliability.  The DOH requires that the City of Pullman water customers be notified of the City’s Water Conservation Program by means of an annual Performance Report regarding our metering status, distribution system leakage, and progress made toward the City’s conservation goals.  The City of Pullman is happy to report that are in compliance requirements of the WUER.   

Source Meters

Source meters are a critical conservation tool since accurate water production and usage data provides information for developing conservation priorities, goals and programs.  Pullman has source meters are all of the wells; test and calibrations are performed annually on all source meters. 


Service Meters

Similarly, service meters are a key component of providing accurate water use information for implementation in conservation planning.  Pullman has service meters on all service connections an performs a comprehensive service meter calibration and replacement program.  Each year, select meters that are two inches and larger are tested, repaired if needed, and calibrated to ensure accuracy.  Additionally, all City of Pullman owned Buildings and City Parks are metered and each department is charged for their water use, thus encouraging conservation within City departments. 

System Leak Detection and Repair

Water utilities that operate efficient systems that minimize leaks demonstrate a strong commitment to sound financial and resource management.  The City of Pullman has an aggressive supply side leak detection and repair program.  The City surveys the entire water distribution system every four years.  Found leaks are promptly repaired. Pullman’s 2015 distribution system leakage was 3.2% of production or 34.5 million gallons.  The previous three-year average is 3.3% of the annual average production or 34.6 million gallons per year.  This compares very favorably to the national average of 16% and is well below the 10% or less requirement of the Rule, and demonstrates that Pullman is successfully managing water leaks. 

Conservation Goals

The City’s conservation program is primarily driven by the desire to minimize the impacts on water resources, namely the regional aquifer, and to meet regulatory requirements.  The goal of the current program, initiated in 2015, is to reduce water use by 29,365 gallons per day on an annual basis (as opposed to peak season) by the end of 2019.  This goal was established using a public process that included conducting a public meeting on November 19, 2013 and a subsequent discussion regarding the draft goal during a City Council meeting.  Public input was encouraged and was also provided.  To help achieve this goal the measures listed below have been selected based on a combination of factors including applicability to the City of Pullman service area, customer acceptance, cost effectiveness and/or savings potential.  

Conservation Goal Status

Since the program inception in the spring of 2015 thru December 31, 2015 the City provided 181 toilet rebates and one irrigated lawn removal rebate.  In addition, 1454 bathroom faucet aerators, 395 toilet leak detection tablets and 615 showerheads were distributed.  The total estimated water savings in 2015 is 4555 gallons per day (1.7 million gallons per year), roughly 16% of the 2019 goal of 29,365 gallons per day (10.7 million gallons per day)  


FacebookEmail Us
TEL: 509.338.3242